Now the application of self loading mixer in the construction project is more and more extensive, and the operation problems are also more and more.Today we're going to talk about what caused the brakes to fail:
1. Brake failure of self loading mixer truck caused by insufficient maintenance
The brake system of self loading mixer truck is usually lack of maintenance, and when it is critically needed, it is likely to strike and cause a catastrophe. Frequently check whether the brake master cylinder, brake cylinder, air reservoir and pipeline work well. Air leaks and poor working conditions should be repaired or replaced immediately, and you should always pay attention to changes in the air pressure on the instrument during driving.
2. Unreasonable operation methods lead to machine failure
Due to the lack of driving experience of the self loading mixer truck, the wrong operation of the self loading mixer led to the malfunction of the parts. When going down a long slope, use a low gear to reduce the speed, use the engine to control the speed, use the brakes as little as possible to prevent the brake pads from overheating, and use the brakes when stepping on the brakes instead of the "suffocating" method.
3. Severe overload, causing brake failure
Severely overloaded, the total mass of the self loading mixer truck increases. Under the action of gravity acceleration, the inertia of the self loading mixer truck is increased, which directly causes the brake to fail. Overloaded vehicles increase the total mass of the vehicle, thereby increasing the movement inertia of the selfloading mixer. When driving an overloaded vehicle, you must be slow, and you should not ignore your life safety in a hurry.
If you want to know more about the self loading mixer, just contact me. Bonnie Yang, mob: +86 17839193601, email: bonnie@camelway.com.